|
| |
Motorized Z-axis Tables
|
|
Home >
Assorted
Motorized Multi-axis Stages
>
Motorized Z-axis Linear
Positioning Stages
|
|
|
|
This motorized positioning table is made of aluminum alloy with an elegant black anodized surface.
It provides 50 mm of travel at a maximum speed with stepper motor of 40 mm per second.
The drive mechanism is lead screw.
The bench size is 120 X 120 mm and has a body weight of 2.8 Kg.
The resolution of 2 microns is achieved with a 10 micro-steps per step stepper motor driver. This linear stage is
also available with a Three Phase Brushless Servo Motor and Optical Encoder (-02 Version).
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an Optical Encoder for precision position verification.
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control. |
|
Specifications
| Type |
Z140-50 |
|
Structure
Description |
Travel |
50 mm |
| Stage Size |
120x120 mm |
| Lead Screw Pitch |
4 mm per turn |
| Travel Guide |
High Precision Linear Ball Bearing |
 |
|
Two-Phase Stepper Motor (1.8 Deg) |
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
|
DB-9 Male Connector |
|
Pin Assignment and Description |
|
1 |
+5 VDC |
|
2 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
|
3 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
|
4 |
Common |
|
5 |
Not Connected |
|
6 |
Stepper Motor Phase A+ |
|
7 |
Stepper Motor Phase A- |
|
8 |
Stepper Motor Phase B+ |
|
9 |
Stepper Motor Phase B- |
|
|
| Body Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
Model Dependent |
| Weight |
2.8 kg |
|
Typical Accuracy
|
Resolution |
Control Electronics Dependent, 2 microns with 10 Micro-steps per Step Motor Driver in use
1 micron with 10 Micro-steps per Step Motor Driver in use |
| maximum speed with stepper motor |
25 mm/sec |
| Maximum Speed with Servo Motor |
|
| Positioning Accuracy |
10 microns |
|
Accessories
Description
|
| Optical Encoder |
| Three Phase Brushless Servo Motor and Optical Encoder (-02 Version) |
|
|
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
Z140-50-01 |
Stepper Motor Driven Single-axis Vertical Stage, Travel
: 50 mm |
Click to Get a Quote |
|
Z140-50-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven Vertical Stage, Travel
: 50 mm |
Click to Get a Quote |
|
Z140-50-03 |
DC
Servo Motor with Quadrature Incremental Optical Encoder Driven Vertical Single-axis Stage, Travel :
50 mm |
Click to Get a Quote |
|
Z140-50-04 |
Stepper Motor Driven Single-axis Vertical Stage
with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor, Travel :
50 mm |
Click to Get a Quote |
|
|
