|
| |
|
Specifications
| |
PYR-45-15-60 |
|
Total Weight |
3.5 kg (7.7 lb) |
| Load Capacity |
4.0 kg (8.8 lb) |
| Base Material |
Aluminum Alloy
|
| Surface Treatment |
Black Anodized |
|
 |
| Typical Phase Resistance |
3.8 Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
|
DB-9 Male Connector |
|
Stepper Motor |
|
Pin Assignment and Description |
|
1 |
+5 VDC |
|
2 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor
(Pitch and Roll Axes) |
|
3 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
|
4 |
Common
(Pitch Axis) |
|
5 |
HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor (Roll Axis) |
|
6 |
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
| |
|
| |
|
| |
|
| |
Yaw (Upper) Axis |
|
Structure Description |
|
Range of Travel |
360
Degrees
Continuous |
|
Gear Ratio |
90:1 |
| Drive Mechanism |
Worm Gear |
| Travel Guide |
Bearing |
|
Typical Accuracy
|
| Resolution |
0.002
degrees
(10 micro-steps
per
step
stepper
motor
driver
in
use) |
| Repeatability |
+/-0.01 degrees |
|
Positional Accuracy |
0.05 degrees |
| Maximum Speed with Stepper Motor |
30 degrees per second |
| Maximum Speed with Servo Motor |
90 degrees per second |
|
|
Roll (Middle) Axis |
|
Structure Description |
Range of Travel |
+/-15 degrees |
|
Table Size |
65 mm x65 mm |
|
Gear Ratio |
1° (stage) : 252° (motor)
|
|
Drive Mechanism |
Worm Gear |
|
Travel Guide |
Crossed-roller Guide |
|
Typical Accuracy
|
| Resolution |
Stepper Motor Driver or Servo Motor Optical Encoder Dependent |
| Repeatability |
+/-0.01 degrees |
|
Positional Accuracy |
0.05 degrees |
| Maximum Speed with Stepper Motor |
14 degrees per second |
| Maximum Speed with Servo Motor |
45 degrees per second |
|
|
Pitch (Lower) Axis |
|
Structure Description |
Range of Travel |
+/-45 degrees |
|
Gear Ratio |
1° (stage) : 296° (motor)
|
|
Drive Mechanism |
Worm Gear |
|
Travel Guide |
Crossed-roller Guide |
|
Typical Accuracy
|
| Resolution |
Stepper Motor Driver or Servo Motor Optical Encoder Dependent |
| Repeatability |
+/-0.01 degrees |
|
Positional Accuracy |
0.05 degrees |
| Maximum Speed with Stepper Motor |
14 degrees per second |
| Maximum Speed with Servo Motor |
45 degrees per second |
|
|
|
Stepper Motor Driven Mechanical Drawing
(Roll
Table)
|
Ordering Information
|
Part No. |
Description |
Amount |
|
PYR-45-15-60-01 |
Three-axis Stepper Motor Driven Yaw, Pitch
and Roll Stage,
Table Diameter 60 mm |
Click to Get a Quote |
|
PYR-45-15-60-02 |
Three-axis
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven Yaw, Pitch and Roll Stage, Table Diameter
60 mm |
Click to Get a Quote |
|
PYR-45-15-60-03 |
Three-axis
DC Servo Motor with Quadrature Incremental Optical Encoder
Driven Yaw, Pitch and Roll Stage, Table Diameter 60 mm |
Click to Get a Quote |
|
PYR-45-15-60-04 |
Three-axis Stepper Motor Driven Yaw, Pitch
and Roll Stage
with 500 Cycles per Revolution Quadrature Optical Encoders
Mounted at the back of the Stepper Motors,
Table Diameter 60 mm |
Click to Get a Quote |
Related Products
|
