|
| |
Motorized Goniometer Stage
|
|
Home >
Motorized Goniometer Stages |
|
This motorized goniometer is made of aluminum alloy with an elegant black anodized surface.
The bench size is 160 X 160
mm and has a body weight of 5 kg.
The drive mechanism is worm and worm gear. The worm gear ratio is 1:400.
It provides +/-15degrees of rotation at a maximum speed of 4degrees per second.
The maximum load of this goniometer table is 30 kg.
The calibrated indicator shows the angle of rotation.
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control..
Video Demonstration |
|
Specifications
|
Type |
AK160-10 |
|
Range of Travel |
+/-15° |
|
Table Size |
160 mm x160 mm |
|
Gear Ratio |
1 : 400 |
|
Height of Rotation Stage |
139 mm+/-0.2 mm |
|
Drive Mechanism |
Worm Gear |
|
Travel Guide |
Crossed-roller Guide |
|
Stepper Motor |
|
Size 23 |
|
Typical Phase Resistance
|
2.5
Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
|
DB-9 Male Connector |
|
Pin Assignment and Description |
|
1,2,3,4,5 |
|
|
6 |
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
|
|
Base Material |
Aluminum Alloy |
|
Surface Treatment |
Black Anodized |
|
Load Capacity |
30 kg |
|
Weight |
12 kg |
|
|
|
|
Rotation Center Deflection Accuracy |
0.03 mm |
|
Maximum Speed |
4degrees/sec |
|
Typical Repeatability |
+/-3 arcsec |
|
|
Mechanical Drawing
|
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
AK160-15-01 |
Stepper Motor Driven Goniometer Stage, Table Size 160
X 160 mm |
Click to Get a Quote |
|
AK160-15-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven Goniometer Stage, Table Size 160
X 160 mm |
Click to Get a Quote |
|
Related Products
|
