Motion Control System
Sonata
Series
|
|
|
|
|
This
motion control system is stand-alone,
easy-to-use, plug-and-play and cost effective
solutions for motion control applications.
Each system
includes the power supplies, controller,
the micro-stepper and/or servo motor drivers.
and motors. The desktop terminal makes the system totally stand-alone and
allow the operator to interact with the motion controller without needing an additional PC.
This series support up to 4 axes of motion, 8 TTL / CMOS inputs,
8 TTL / CMOS outputs, 3 analog inputs, and up to 5 optical encoder
inputs.
The system can also be operated using an analog joystick or a trackball.
The speed of the motor is
proportional
to the tilt angle of the
joystick
or the rotational speed of
the trackball.
|
Features
- Compact
- Plug-and-Play
- Quick and Easy to Install
- Very Compact and Easy to Use
- Low Power Consumption, High Torque Motors, High
Speed Capability
- 4-Line LCD
- 32-key Keypad
- Different Modes of Operation:
1) Stand-alone, No PC Required to Operate
2) Joystick / Trackball Controlled
- Optical Encoder Feedback
- Available also to Drive Stepper, DC Servo, Brushless, and Voice Coil Motors
- Totally Integrated Solution
- Free Software Included
|
|
Ordering Information
|
Part No. |
Description |
Price |
|
Sonata-1 |
Single-axis, Motion Control System |
Call |
|
Sonata-2 |
Two-axis, Motion Control System |
Call |
|
Sonata-3 |
Three-axis, Motion Control System |
Call |
|
Sonata-4 |
Four-axis, Motion Control System |
Call |
Joy-3
picture |
Three-axis, Pre-wired Joystick with 3 Speed Selection
Keys |
$325.00 |
Joy-2
picture |
Two-axis, Pre-wired Joystick with 3 Speed Selection Keys |
$225.00 |
TRKBL
picture |
Pre-wired Trackball |
Call |
Rotary Stepping Motors,
Economy Series |
|
|
Size 17 |
|
|
STPM-17-200-40-W
data sheet |
Pre-Wired Stepping Motor, Size 17, 200 Steps per
Revolution, 40 oz-in, 0.29 N-m, Cable Length 6 ft (1.8 m) |
$45.00 |
|
Size 23 |
|
|
STPM-23-200-140-W
data
sheet |
Pre-Wired Stepping Motor, Size 23, 200 Steps per
Revolution, 140 oz-in, 1.02 N-m, Cable Length 6 ft (1.8 m) |
$55.00 |
STPM-23-200-200-W
data
sheet |
Pre-Wired Stepping Motor, Size 23, 200 Steps per
Revolution, 200 oz-in, 1.45 N-m, Cable Length 6 ft (1.8 m) |
$65.00 |
|
Size 34 |
|
|
STPM-34-200-320-W
data
sheet |
Pre-Wired Stepping Motor, Size 34, 200 Steps per
Revolution, 320 oz-in, 2.30 N-m, Cable Length 6 ft (1.8 m) |
$135.00 |
|
More Rotary Stepping Motors... |
| Single Axis Linear Stepping Motor |
|
| STPM-SL-AABB-CX
data
sheet
|
Speeds up to 80 in /sec (2 m/sec) and Strokes up to 40” x 60” (1 m x 1.5 m) |
Call |
Stepping motors with gearbox and optical encoder are also
available.
Other sizes are available.
Stepping Motor System Components
|
