About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized Linear X-axis plus Rotary Positioning Stages

Home > Assorted Motorized Multi-axis Actuators

This motorized positioning table is made of aluminum alloy with an elegant black anodized surface.

It provides 15, 30, 50 and 75 mm of travel at a maximum speed of 5 mm per second. Other sizes and travel strokes are also available.

The drive mechanism is high precision crossed roller.

The resolution of 0.5 μ is achieved with a 10 micro-steps per step stepper motor driver. This linear stage is
also available with a servo motors and optical encoders.

The knob mounted on the motors allow for manual adjustment. These knobs may be replaced with an optical encoders for precision position verification.

This stage is compatible with OES' line of
Motion Controllers..


Structure Description

Linear Travel
Range of Travel (mm) Pitch of Lead Screw
15 0.5 mm per turn
30 1 mm per turn
50 1 mm per turn
75 1 mm per turn
100 4 mm per turn
150 4 mm per turn
200 4 mm per turn
300 4 mm per turn
400 4 mm per turn
Rotary Travel 360 Degrees Continuous
Travel Guide

High Precision Crossed Roller

Phase Resistance 3.8 Ohm, Bi-directional
Maximum Phase Current 1 Amp
9 pin DB-9 Male Connector
Pin Assignment and Description
1 +5 VDC for the Limit Sensors
2 Far Limit, Normally High, Active Low
3 Near Limit, Normally High, Active Low
4 Return for+5 VDC
5 Not Connected
6 Phase A+
7 Phase A-
8 Phase B+
9 Phase B-
Main Material Aluminum Alloy
Surface Treatment Black Anodized

Typical Accuracy

Resolution Configuration Dependent
Maximum Speed 5 mm / sec
Repeatability 3 μ
Positional Accuracy 10 μ

Accessories Description

Optional Optical Encoders
Optional Servo Motors
Optional Built-in Stepper Motor Drivers
Other Sizes and Strokes Available

Ordering Information

Part No. Description Amount
XR-xxx-rrr-01 Linear X-axis and Rotary Stage

Range of Travel (mm):
15, 30, 50, 75, 100, 150, 200, 300, 400, 500

The rrr donates the rotary stage diameter in mm.

Click to Get a Quote


Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us