Cycling and Endurance Unit
|
 |
|
|
The Solenoid Control System is designed
for Life Cycling and Endurance Testing of
electro-mechanical components.
The system may be used as both an engineering evaluation and production
quality assurance tool. Each system may drive up to sixteen independent
devices with different actuation profiles.
The typical applications of the LCET tester is life cycling of the
solenoids, relays, motors, voice coil motors, actuators, valves,
keyboards, switches, and other applicable devices. The other applications
of LC testers are testing and evaluation of shock and vibration systems.
The compact and stand-alone unit consists of
controller, drivers, and the power
supplies. It conveniently connects to the serial port of the
host computer.
The system
may be controlled in different ways;
1)
Stand-alone
In this mode, the controller does not need an
external device such as a PC to operate. The
controller is programmed in a simple programming
language. The code is developed, downloaded to
the controller, run and saved in the
controller's non-volatile memory using the
supplied
Integrated Development Environment (IDE)
software.
2)
Externally Controlled
In this mode, the external host such as a PC,
micro-controller or PLC sends a series of
commands to the controller via the RS-232 serial
port. The controller processes and performs the
incoming commands and responds with proper
messages.
|
|
|
|
|
The system interfaces to a wide variety of analog and digital
transducers to monitor the output process. These include LVDTs, RVDTs,
Proximity Sensors, Accelerometers, Optical Encoders, Laser
Interferometers, Pressure Sensors and other similar devices.
|
|
Features
Stand-alone
Runs Multiple Devices Simultaneously
Complete Unit Integrates Controller, Power Supplies and Drivers
Quick and Easy to Install
Very Compact and Easy to Use
Easy Programming Language, No Compiler or Assembler Required
Different Modes of Operation:
1) Host Controlled
2) Stand-alone, No PC Required to Operate
Optical Encoder Feedback
Totally Integrated Solution
Free Software Included
|
Typical
Applications
Endurance Testing
Shock and Vibration Testing
Vibration Cancellation
|
Actuators
- Linear and Rotary Solenoids
Voice Coil Actuators
Actuator Driver
Pulse Width Modulated (PWM)
Wide Output Voltage
High Output Current
Current Controlled or Voltage Controlled
Mechanical
- Size: 10.0'' (250 mm) W X 10.8" (265 mm) D X 4.875"
(124 mm) H
- Material: Aluminum, 0.09" (2.3 mm) Thickness
Power Requirement
- 110 VAC, 50 ~ 60 Hz Or
- 220 VAC, 50 ~ 60 Hz Or
- +12 VDC to +80 VDC
|
Software
- Easy System Setup and Evaluation
- Menu driven, No Programming Required
Communication Interface
Feedback
Devices
LVDTs and RVDTs
Laser Interferometers
Pressure Transducers
Any Analog Signal
Absolute and Incremental Optical Encoders
General
Specifications
- LED Power Indicator
- High Performance Line Filter
- Compact Industrial Enclosure
- Drives up to 16 Devices Simultaneously
|
Ordering Information
| Part No. |
Description |
Price |
| LCET-PH-2 |
Two-device Cycling and Endurance Unit, Incorporating Pick and Hold Module |
from $995 |
| LCET-PH-4 |
Four-device Cycling and Endurance Unit, Incorporating Pick and Hold Module |
from $1195 |
| LCET-PH-6 |
Six-device Cycling and Endurance Unit, Incorporating Pick and Hold Module |
from $1395 |
| LCET-PH-8 |
Eight-device Cycling and Endurance Unit, Incorporating Pick and Hold Module |
from $1595 |
| LCET-PH-10 |
Ten-device Cycling and Endurance Unit, Incorporating Pick and Hold Module |
from $1795 |
| LCET-PH-12 |
Twelve-device Cycling
and Endurance Unit, Incorporating Pick and Hold Module |
from $1995 |
| LCET-PH-14 |
Fourteen-device Cycling
and Endurance Unit, Incorporating Pick and Hold Module |
from $2195 |
| LCET-PH-16 |
Sixteen-device Cycling
and Endurance Unit, Incorporating Pick and Hold Module |
from $2395 |
| LCET-PWM-1 |
One-device Cycling and Endurance Unit, Incorporating
PWM Module
Unit |
from $1295
|
| LCET-PWM-2 |
Two-device Cycling and Endurance Unit, Incorporating
PWM Module
Unit |
from $1495 |
| LCET-PWM-3 |
Three-device Cycling and Endurance Unit, Incorporating
PWM Module |
from $1695 |
| LCET-PWM-4 |
Four-device Cycling and Endurance Unit, Incorporating
PWM Module |
from $1895 |
|
