Features
- Overall unit dimensions: 1.2" x 0.7"
- Input voltage: 6 - 13.5 V
- Bidirectional motor port can deliver ~1 A continuous (3
A peak)
- 1 user LED
- User potentiometer
- RoHS Compliant
|
This series is a very compact but complete motor controller, integrating a high-performance microcontroller and two motor drive channels in the same 24-pin form factor.
|
Pin Assignment and
Description |
|
MOTOR1-B |
Connect the black lead of your
motor to this terminal. |
|
MOTOR1-A |
Connect the red lead of your
motor to this terminal. |
|
ENCODER1-A |
Connect the Channel A pin of
your encoder to this terminal. |
|
ENCODER1-B |
Connect the Channel B pin of
your encoder to this terminal. |
|
STEP1 |
Connect the STEP signal to
this terminal. |
|
DIRECTION1 |
Connect the DIRECTION signal to
this terminal. |
|
HOME1 |
Home Switch Input,
Active High |
|
-LIMIT1 |
Negative Limit
Switch Input, Active High |
|
+LIMIT1 |
Positive Limit
Switch Input, Active High |
|
ANALOG-1 |
ANALOG-1 Input |
|
+5 VDC OUT |
User +5 VDC
|
|
+6 ~ +13.5 VDC IN
|
Connect the positive (red) lead
of your power supply to this terminal. It must be between +6 VDC
to +13.5 VDC. |
|
GROUND |
Connect the negative (black) lead
of your power supply to this terminal. |
|
RESET/ |
RESET Signal |
|
DATARCV |
Data Transmit to PC |
|
DATAXMT |
Data Receive from PC |
Ordering Information
| Part No. |
Description |
Amount |
|
DCMC-01 |
DC Motor Driver/Controller
|
Inquire |
Motion Control Components
|
